Infernus INF-500 Commercial Heavy Duty 500W Hand Blender with 450mm Shaft (13A)

Description

Achieve flawless sauce consistency, purée seasonal soups directly inside cooking vessels, and eliminate manual blending bottlenecks with the Infernus INF-500 Commercial Heavy Duty 500W Hand Blender with 450mm Shaft. Purpose-built for professional food service operations—including restaurant sauce lines, gastropubs, hotel banqueting kitchens, catering trailers, and staff canteens—this versatile 500W immersion blender set pairs precision variable-speed control with an intermediate 450mm stainless steel blending tube and standard 13-amp plug-and-play convenience.

Commercial Heavy Duty Hand Blender Features & Performance

• Responsive 500W Motor & Variable Speed Precision: Blending velvety coulis, rich gravies, or thick potato-leek soups requires nuanced control rather than raw, uncontrolled speed. The INF-500 is powered by a high-torque 0.5kW (500W) commercial motor governed by an intuitive variable speed control dial delivering between 4,000 and 16,000 RPM. Kitchen staff can initiate mixing at low speeds to prevent surface aeration and splashing, before dialling up to maximum velocity for silky, lump-free emulsification.
• Balanced 450mm Stainless Steel Reach: Standard 300mm shafts are often too short for deep stockpots, while oversized 550mm shafts can feel unwieldy in standard cookware. The included 450mm (17.7-inch) food-grade stainless steel shaft offers an optimal intermediate reach, allowing operators to work cleanly at the base of 40L to 70L stockpots, soup cauldrons, and deep gastro containers while keeping the motor handle safely elevated above steam and boiling liquids.
• Hydrodynamic Anti-Splash Bell & Hardened Blade: The lower blending foot features a razor-sharp stainless steel blade enclosed in an engineered anti-splash cowl. The contoured bell shape generates a continuous downward hydrodynamic vortex that draws solids into the rotating blades while containing hot liquids, keeping worktops and chef uniforms spotless.
• Ultra-Lightweight Ergonomic Construction (2.3kg Net): Heavy industrial mixers can cause severe wrist and forearm fatigue during continuous blending tasks. Weighing just 2.3kg in total, the INF-500 features an ergonomically moulded grip and intuitive trigger placement, allowing chefs to guide the blender smoothly through thick liquids without excessive physical effort.
• Tool-Free Modular Detachable System: Equipped with a robust quick-lock bayonet coupling. The 450mm stainless shaft detaches with a simple quarter-turn, enabling rapid sink cleaning or dishwashing. The motor handle is also fully compatible with alternative Infernus shaft lengths (300mm, 350mm, 400mm, 500mm, 550mm) and commercial whisk attachments (INF-WLK350) for multi-station versatility.
• True Plug & Play Standard 13A UK Electrics: Rated at 500W, the INF-500 connects directly into any standard UK 13-amp 3-pin wall outlet. It requires zero three-phase electrical modifications, commercial isolators, or electrician call-out fees. Simply plug into the nearest wall socket and start blending immediately.

Technical Specifications

Operating & Maintenance Guidance: Always submerge the bell housing into the liquid before depressing the power trigger to prevent splashing. Begin blending on lower speeds to break down large vegetable chunks before increasing RPM for smooth finishing. Never immerse the motor handle in liquids; detach the stainless shaft and wash with warm, mild antibacterial soapy water after each use.

Pair this commercial heavy-duty hand blender with our commercial vegetable prep machines, countertop meat slicers, and heavy-duty stainless steel prep tables to complete a high-efficiency commercial food preparation station.