Infernus INF-100GGC Commercial 100cm Chrome Gas Griddle 15mm Plate 12kW (LPG / NG)
£749.00 ex. VAT (£898.80 inc. VAT)
Wide-format 1000mm commercial countertop gas griddle engineered for high-output burger bars, steak houses, busy breakfast cafés, and heavy-duty mobile catering trailers. Engineered with an ultra-thick 15mm mirror-finish hard chrome steel cooking plate (997mm x 400mm surface) that dramatically reduces kitchen radiant heat, prevents carbon buildup, eliminates flavour crossover, and wipes clean with ice or water. Powered by heavy-duty steel horseshoe burners generating 12kW of uniform thermal heat across independent cooking zones with a wide 210°C to 350°C operational range. Equipped with piezo push-button ignition, certified thermocouple flame failure safety devices (FFD), a wide fat drainage channel with a pull-out stainless steel waste drawer, adjustable non-slip feet, and a 1/2″ rear gas inlet. Factory-configured for bottled Liquid Petroleum Gas (LPG Propane / Butane) and supplied complete with a Natural Gas (NG) conversion jet kit.
- 15mm Mirror-Finish Hard Chrome Plate: Superior heat retention with minimal radiant heat loss into the kitchen environment
- Flavour-Neutral Cooking Surface: Cook delicate fish, pancakes, and smash burgers back-to-back without flavour transfer
- High-Power 12kW Horseshoe Burners: High thermal output delivers rapid preheat times and instant recovery on frozen drops
- Wide 1-Metre (997 x 400mm) Cooking Zone: Multi-zone configuration allows simultaneous searing, frying, and holding
- Certified Flame Failure Safety (FFD): Thermocouple valves automatically isolate gas if a burner flame blows out
- Dual-Fuel Versatility (LPG & NG): Ready for bottled LPG cylinders, includes full Natural Gas conversion nozzles
- Integrated Grease Management: Wide aperture drain aperture empties into a full-depth slide-out stainless drawer
- Heavy Commercial Construction: High-grade stainless steel chassis built for rigorous trade use (75kg gross weight)
- Commercial Guarantee: Protected by a 12-Month Commercial Parts Warranty
In Stock
- Free UK Mainland Delivery
- 12-Month Commercial Parts Warranty
- VAT Invoice Included
Description
Maximize your pass capacity, lower kitchen ambient temperatures, and eliminate flavour cross-contamination with the Infernus INF-100GGC Commercial 100cm Chrome Gas Griddle. Purpose-built for high-volume commercial kitchens, gourmet burger joints, busy diner lines, and professional catering trailers, this 12kW countertop workhorse pairs an expansive 1-metre mirror-finish chrome cooking zone with precision commercial gas engineering.
Commercial 100cm Chrome Gas Griddle Features & Performance
- Heavy-Gauge 15mm Hard Chrome Cooking Surface: Unlike traditional mild steel plates that absorb fats and radiate intense heat directly at the chef, the INF-100GGC features an ultra-dense 15mm hard chrome mirror plate. The dense chrome barrier reflects heat downward and into the food rather than dissipating it into the kitchen, resulting in a cooler working line, lower gas consumption, and superior thermal retention when loading cold raw patties or steaks.
- Zero Flavour Transfer & Effortless End-of-Shift Sanitisation: The smooth, non-porous chrome surface prevents food particles, grease, and carbon from lodging in microscopic steel fissures. Chefs can sear seasoned beef patties, flip eggs, and cook sweet breakfast pancakes on the same plate without flavour crossover. Cleaning requires no harsh abrasive stones or chemicals—simply apply cold water or ice while the plate is warm to lift residues into the drainage trough.
- Steel Horseshoe Burners Delivering 12kW Output: Driven by heavy-duty steel horseshoe burners engineered to project wide, uniform flame patterns beneath the griddle deck. Providing 12kW (approx. 41,000 BTU/hr) of combined thermal output, the burners eliminate dead zones across the 997mm x 400mm deck, maintaining strict temperature consistency between 210°C and 350°C during peak rushes.
- Independent Zoned Heat Management: The griddle features independent precision gas control taps, allowing operators to run multi-temperature cooklines simultaneously. Sear steaks and smash burgers at high heat on one side while gently toasting brioche buns or holding cooked proteins on the other, saving substantial gas during off-peak hours.
- Certified Flame Failure Safety Valves (FFD): Built in complete compliance with UK commercial catering safety requirements. Each burner is monitored by an independent thermocouple flame failure device that automatically cuts off the gas supply immediately if the flame is extinguished by drafts in mobile trailers or accidental liquid spills.
- Dual-Fuel Adaptability (LPG & Natural Gas): Supplied pre-configured for bottled Liquid Petroleum Gas (LPG Propane / Butane) at 2800–3700 Pa, making it ideal for mobile food vans and outdoor events. The box also includes a full Natural Gas (NG) conversion jet kit, giving brick-and-mortar kitchens the flexibility to hook up directly to mains gas supplies.
- Heavy-Duty Stainless Steel Chassis & Grease Drawer: Fabricated with a robust stainless steel body, high-profile welded splash guards to contain oil splatter, non-slip height-adjustable leveling feet, and a wide-mouth grease drainage channel that directs runoff into a high-capacity slide-out stainless steel drawer.
Technical Specifications
| Brand | Infernus |
| Model / SKU | INF-100GGC |
| Equipment Type | Commercial Countertop 100cm Chrome Gas Griddle Flat Top |
| Plate Thickness & Finish | 15mm Thick Hard Chrome Mirror-Finish Steel Plate |
| Usable Cooking Surface (W x D) | 997mm x 400mm (Smooth Flat Top) |
| Total Heat Output | 12.0 kW (Approx. 41,000 BTU/hr) |
| Burner Technology | Heavy-Duty Steel Horseshoe Burners |
| Operating Temperature Range | 210°C to 350°C |
| Fuel Compatibility | LPG (Factory Fitted) + Natural Gas (Conversion Jets Included) |
| Gas Connection Inlet | 1/2″ BSP (Rear Gas Connection) |
| Ignition System | Independent Piezo Spark Ignition |
| Safety Features | Certified Thermocouple Flame Failure Device (FFD) per Zone |
| Waste Management | Wide Drainage Aperture with Slide-Out Stainless Grease Drawer |
| Machine Dimensions (W x D x H) | 1000mm x 590mm x 400mm |
| Packed Dimensions (W x D x H) | 1120mm x 650mm x 410mm |
| Net / Gross Weight | 65.0 kg / 75.0 kg (Pallet Freight Dispatch) |
| Chassis Construction | Heavy-Gauge Commercial Food-Grade Stainless Steel |
| Base Support | Adjustable Non-Slip Heavy-Duty Leveling Legs |
| Warranty | 12-Month Commercial Parts Warranty |
Installation & Commissioning Note: All commercial gas appliances must be installed, tested, and commissioned by a qualified Gas Safe registered engineer in full accordance with commercial kitchen ventilation regulations. Always use non-abrasive scrapers and avoid pumice stones to preserve the mirror-chrome cooking surface.
Pair this commercial 100cm chrome gas griddle with our freestanding electric fryers, commercial bains marie, and stainless steel prep tabling to build a high-performance commercial cookline.




